Axiom NDT and Offshore Services

Buy British Standards

Axiom are affiliates of the British Standards Institute and you can buy standards through this website. You may find the following information helpful. Please click on a Standard to find out more.

Standards applicable to Industrial Rope Access

• BS  7985:2009 Code of practice for use of rope access techniques for industrial purposes
• BS 7883:2005 Code of practice for the design, selection, installation, use and maintenance of anchor devices conforming to BS EN 795
• BS EN 795:1995 Protection against falls from height – Anchor devices – Requirements and testing

Standards that are sometimes applicable to Industrial Rope Access

• BS EN 1263-1:2002 Safety nets. Safety Requirements and test methods
• BS EN 1808:1999 Safety requirements on suspended access equipment
• BS EN ISO 12402-3:2006+A1:2010 – Personal flotation devices. Lifejackets, performance level 150. Safety requirements
• BS EN ISO 12402-2:2006+A1:2010 – Personal flotation devices. Lifejackets, performance level 275. Safety requirements

Standards applicable to Non-Destructive Testing

• BS EN ISO 9712:2012 Non-destructive testing. Qualification and certification of NDT personnel
• BS EN ISO 17637:2011 – Non-destructive testing of welds. Visual testing of fusion-welded joints.
• BS EN ISO 17638:2009 – Non-destructive testing of welds. Magnetic particle testing
• BS EN ISO 23278:2009 – Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels
• BS EN ISO 23277:2009 – Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels
• BS EN 571 (1997);- Penetrant testing. General principles.
• BS EN 1711 (2000)- ISO 17643.2 ;- NDE of welds. Eddy current testing by complex phase analysis.
• BS EN ISO 17640:2010 – Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment.
• BS EN ISO 11666:2010 – Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
• BS EN ISO 5817:2007 – Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
• BS EN 10228 (1999)- Parts 1, 2 & 3;- MPI/DPI & UT of steel forgings.
• BS EN 10160 (1999);- Ultrasonic testing of steel flat product of 6mm thick & greater.

Relevant Legislation / guidelines not contained within a standard

• The Industrial Rope Access Trade Association: International Accepted Code of Practice (http://www.irata.org/publications.htm)
• The Work at Height Regulations 2005 as amended
• Lifting Operations and Lifting Equipment Regulations 1998
• Provision and Use of Work Equipment Regulations 1998
• Management of Health and Safety at Work Regulations 1999
• Confined Space Regulations 1997
• Health and Safety at Work Act 1974
• The Personal Protective Equipment at Work Regulations 1992

Standards Applicable to Quality Management Systems

• BS EN ISO 9001 : 2008

Visit this site for free downloads: http://www.legislation.gov.uk